Datex Ohmeda Products

Patient Monitors

Datex Ohmeda Products

Features

  • Small footprint bedside monitor with large 10.4” active matrix color display
  • Proven easy-to-use S/5 user interface
  • Shows up to 6 waveforms
  • Color-coded, prioritized alarms
  • 4 user-configurable modes for care-specific pre configurations
  • Waveform snapshot to store and recall waveform samples for later analysis
  • On-line help for menu functions
  • 5 or 30-minute minitrends continuously on screen for quick historical view
  • 24-hour graphical trends of all parameters
  • Adjustable display brightness
  • Optional built-in, three-channel thermal array recorder
  • Built-in back-up battery to handle sudden power down situations
  • Wall mount, roll stand available for best workplace ergonomics
  • Compatible with Datex-Ohmeda S/5 Network and Central for monitor-to-monitor communication and centralized viewing

 

Specifications

  • Dimensions: 0” (W) x 8.7” (D) x 11.8” (H)/330 x 220 x300 mm
  • Weight: <11.2 kg, 24.8 lbs (F-MXG); <10.2 kg, 22.6 lbs (F-MX)
  • Power: 100-240 Vac ±10%, 60/50 Hz
  • Back-Up Battery: 15 min guaranteed, charging time typically 5 h
  • Graphical Trends: 20 min, 1, 2, 4, 6, 10, 12 and 24h
  • Numerical Trends: All parameters, sampled every 5 min and after NIBP measurement
  • Alarms: Adjustable high and low alarms
  • Operating Temperature: +10…+40 °C (50…104 °F)
  • Storage Temperature: –10…+50 °C (14…122 °F)
  • Atmospheric Pressure:67-106 kPa (500-800 mmHg)

 

Heart Rate

  • Measurement Range: 30 to 250 beats per min (bpm)
  • Measurement Accuracy: ±5% or ±5 bpm, whichever is greater
  • Pacemaker Pulse Detection: 2 to 500 mV, 0.5 to 2 ms

 

Impedance Respiration

  • Measurement Method: Measurement uses ECG electrodes to measure the impedance changes as a result of breathing
  • Measurement Range: 4 to 120 breaths/min

 

Screen

  • Display Size and Type: 4″ LCD color
  • Number of Traces: Up to 6
  • Display Resolution: 640 x 480

 

ECG

  • Number of Channels: 3
  • Number of Leads: 3 or 5
  • ST Analysis: 3 channels, continuous

Features

Central Unit and Displays

  • Central Unit and displays are physically separate components
  • Four display options with integrated monitor controls: 15″ or 17″ high resolution color video display and 10.4″ or 15″ flat panel color LCD display
  • Large 21″ color slave CRT display
  • User configurable display layout and colors
  • Support for up to 8 waveforms on screen
  • Support for user configurable second and third screen with different waveform and numerical information
  • Anesthesia dedicated alarm system
  • Alarms display and adjustment page
  • 10-minute graphical mini trends referenced to set alarm limits
  • Automatic alarm limits function
  • Six user configurable modes and special cardiac bypass mode
  • 24 hour numerical and graphical trends
  • Split screen capability to show ST, spirometry loop, EEG, EP or mini trends permanently
  • Four user-configurable graphical trend pages
  • Trend cursor in both graphical and numerical trends
  • Waveform snapshots to store and recall waveform samples
  • Help function
  • On-line help for menu functions
  • Open software and hardware architecture
  • Easy insertion/removal of plug-in parameter modules without interrupting other monitoring
  • Anesthesia care oriented user interface
  • Optional extended arrhythmia analysis
  • Connector for Datex-Ohmeda S/5™ Device Interfacing Solution
  • S/5™ ComBar
  • Anesthesia specific command bar for intuitive access to the monitoring functions
  • Removable command bar brings monitor controls close to the user
  • S/5™ Extension Frame
  • Frame with 4 additional module slots
  • Moves patient cables close to the patient
  • Single cable connects the Extension Frame to the s/5 anesthesia Monitor’s Central Unit
  • Reduces patient cable clutter
  • Mounts to any vertical or horizontal pole
  • S/5™ Remote Controller
  • Remote Controller for intuitive monitor operation
  • ComWheel™ and 12 keys, direction function keys for most common functions

 

Specifications

Display

  • Display size: 1 in diagonal.
  • Display type: Active matrix color TFT LCD.
  • Display resolution: SVGA resolution, 800 x 600.
  • Number of traces: up to 8.
  • Display layout and colors: User-configurable. Integrated Command Board with direct function keys, menu keys and ComWheelª for selections and adjustments in menus.

 

Frame

  • Module capacity: 2+2 module
  • I/O connections: RS-232 computer serial output. 2 analog outputs. External keyboard connector.
  • Network option: Compatible with Datex-Ohmeda Network for monitor-to-monitor communication and centralized viewing.
  • Network and MemCard option: Activates MemCards to transfer the trended data of patient vital signs.
  • Printing: Laser printing capabilities with serial printer supporting PCL5 language (Network and serial/parallel converter).
  • Recorder option: Built-in three-channel thermal array recorder.
  • Mounting options: Bed mount, wall mount and roll stand.

 

Dimensions

  • Size: 2 in W x 8.1 in D x 13.4 in H (335 x 205 x 340 mm).
  • Weight (without modules): 2 lbs (11 kg)

 

Power Supply

  • Rated voltage range and frequencies: 100 to 240v ±10%, 50/60 Hz.
  • Maximum power consumption: 140 VA.
  • Protection class: Class I.
  • Grounding: Hospital grade.

 

Battery

  • Type: Built-in NiMH battery (2 pcs).
  • Capacity: Up to 1.5 h typical on full charge at 23°C.
  • Recharging: When connected to mains power.
  • Charging time: 10 hours to full capacity. Battery operation alarm.
  • Indicator: Battery bar displayed on the screen.

 

Trends

  • Graphical: All parameters, selectable times from 30 min to 72 h.
  • Numerical: Continuously measured parameters sampled every 5 minutes, NIBP and PCWP values updated after each measurement. Also marker triggers numerical trend updating.
  • Trend cursor: In both graphical and numerical trends.

 

Alarms

  • Alarm system classified into three categories according to priority in critical care; color and audio tone coded.
  • Central alarms display and adjustment page.
  • 10 min graphical mini trends referenced to set alarm limits

Features

  • Ideally suited for PACU and day surgery monitoring
  • Small footprint bedside monitor with extra large 12.1 inch color display
  • Large waveforms and numerics for easy viewing from long distances and multiple viewing angles
  • Basic hemodynamics and full airway gas measurements
  • Up to 8 waveforms and 4 numeric digit fields can be displayed
  • 24-hour graphical and numeric trends can be displayed and used to access historical data
  • Color-coded prioritized and adjustable alarms that can be managed at the monitor or optionally from the S/5™ Network and Central
  • Optional extended arrhythmia analysis
  • Waveform snapshots to store and recall waveform samples for later analysis
  • Intuitive easy-to-use S/5 interface designed for the anesthesia care process
  • Six user-configurable display pages for each mode
  • S/5™ Device Interfacing Solution support for other patient care devices brings information to the Compact Monitor display screen
  • Rugged, shock resistant design offers a built-in battery and handle for intra-hospital transport monitoring with roll stand, wall and bed mounting options available
  • Integration of transport data with optional MemCard™
  • Optional built-in, three-channel thermal array recorder
  • Compatible with Datex-Ohmeda S/5 Network and Central for monitor-to-monitor communication and centralizing viewing
  • Wireless networking (WLAN) option
  • Optional deioRecorder for Anesthesia with integrated keyboard and shared user interface for documentation

 

Specifications

Display

  • Display Size: 1 in diagonal
  • Display Type: Active matrix color TFT LCD
  • Display Resolution: SVGA resolution, 800 x 600
  • Number of Waveforms: Up to 8
  • Number of Digit Fields: Up to 4
  • Display Layout and Colors: User-configurable
  • Integrated Command Board with direct function keys, menu keys and ComWheel™ for selections and adjustments in menus

 

Frame

  • Module Capacity: 2+2 module slots
  • I/O Connections: RS-232 computer serial output, 2 fixed analog outputs, connector for remote controller, external keyboard and barcode reader with Y-cable, defibrillation sync, Nurse call
  • Device Interfacing Solution: Connector for up to 10 simultaneous S/5 DIS interfaces
  • Network: Compatible with Datex-Ohmeda S/5 Network and Central for monitor-to-monitor communication,
  • centralized viewing and remote alarm management
  • Wireless Network Option: Allows the monitor to utilize both the wired and wireless network (WLAN) for centralized monitoring
  • MemCard Option: Activates MemCards to transfer the trended data of patient vital signs
  • Printing: Laser printing capabilities: serial printer supporting PCL5 language or network printer (serial/parallel converter, additional accessory)
  • Recorder Option:Built-in three-channel thermal array recorder
  • Mounting Options:Bed mount, wall mount and roll stand

 

Dimensions

  • Size: 2″ W x 8.1″ D x 13.4″ H (335 x 205 x 340 mm)
  • Weight: 2 lbs/11 kg

 

Battery

  • Type: Built-in NiMH battery
  • Capacity: Up to 1.5 h typical on full charge at 23°C/73°C; with combination: M-NESTPR, M-miniC and N-CMW typically 2h
  • Recharging: When connected to main power
  • Charging Time: 10 hours to full capacity
  • Battery operation alarm: Early warning – ‘Battery low’ note, Final warning -‘Battery low’ alarm
  • Battery state indicator: Battery bar displayed on the screen

 

Alarms

  • Alarm system classified into three categories according to priority in anesthesia; color and audio tone coded
  • Central alarm display and adjustment page
  • 10 min graphical mini-trends referenced to set alarm limits

 

Modes

  • Modes: Up to 6 user-configurable modes for care-specific configurations
  • Pages: Up to 6 user-configurable display pages for each mode